FOR STONE · CONCRETE · BRICK · WOOD
Heavy-Exposure
Invisible, breathable protection for stone, concrete, brick and wood. From Europe's landmarks to your job site: the German-engineered sealer, now produced in Texas for Texas builders.
German-engineered · Produced in Fort Worth, Texas · Water-based
BEST SELLER
Available in 32 oz, 1 gal, 5 gal and 55 gal+
Bulk pricing for contractors
SURFACES
Porous surfaces
Concrete, brick, wood and natural stone like limestone, travertine and pavers
COVERAGE
400–600 sq ft per gallon
Varies with the absorbency of the surface
SIZES
32 oz · 1 gal · 5 gal · 55 gal+
Bulk pricing available
LIFESPAN
3–6+ years
Up to twice as long on vertical surfaces like facades
HOW IT WORKS
Won't flake, chip or peel
Heavy-Exposure absorbs into the substrate and creates a molecular-level barrier that protects from within: invisible, long-lasting protection from water, oil, dirt and other impurities.
Long-term protection
3–6+ year lifespan, up to twice as long on facades.
Invisible protection
The natural look remains.
Strongly hydrophobic
Water and oil bead up immediately.
Diffusion-open
The surface continues to breathe.
Environmentally responsible: water-based and free of silicone and organic solvents. Non-corrosive, non-irritating and safe for people and the environment.
ECO-SEAL VS. TYPICAL SEALERS
Why builders switch
WHERE TO USE IT
Building materials are expensive. Protect them.
Heavy-Exposure is incredibly versatile and suitable for a wide range of surfaces and applications.
Treated lumber · Pine · Cedar
Limestone · Flagstone
Travertine · Brick · Pavers
Stone
Outdoor living areas
Pool decks
Patios
Concrete
Garages
Walkways
Patios
Brick
Walls
Columns
Facades
Wood
Fencing
Decks
Exposed beams
PROJECTS
Proven on real projects
The Texas projects were completed by our local customers. The European landmarks were treated with the same Heavy-Exposure formula by our German partner.
APPLICATION
How to apply
1
Clean the surface
Remove all stains, contaminants and cleaning agents.
2
Let it dry completely
We recommend a 24-hour drying period.
3
Apply Eco-Seal
Spray or brush onto the surface. For porous surfaces, apply wet-on-wet: put on the second coat while the first is still wet.
4
Let it cure
Leave the surface undisturbed for 24 hours to fully dry.
DATA SHEETS & VOLUME PRICING
Need the technical data sheet?
Tell us what you're sealing and we'll send the right documents for your project: the technical data sheet (TDS), safety data sheet (SDS), and coverage and application guidance. Contractors and specifiers, ask about volume pricing.